Spindle moulder machine are commonly used to trim and shape wood to make it ideal for various uses such as in shutters, windows, frames, doors, etc. The FAHD Italia T100 Spindle moulder for trimming, an entirely manual basic tool suited to small-scale artisans. The FAHD Italia Spindle Moulders are commonly used on an artisanal or industrial scale. For that reason our range of products covers the various needs of artisans and hobbyists right up to the industrial needs of the woodworking sector. FAHD Italia T100 Spindle Moulder Tech Spec- -Working table dimensions (mm) 700—1020 -Available spindle diameters (mm) 30-35-40-50 -Max table opening (mm) 230—70 -Vertical stroke (spindle ˜ 30-35) 140 mm -Vertical stroke (spindle ˜ 40-50) 180 mm -Working table height 900mm -Spindle speed (rpm) 2500/5000/8000/10000 -Motor power 4HP -Weight approx. 400 KG CE Equipment -Spindle hood -Profiling spindle hood -Rounding spindle hood -2 dust extraction hoods (1x ¸60mm,1x¸120 mm) -Electrical configuration for feeder -Self-braking motor Optional- -Tilting spindle moulder 45° with electronic digital readout for corner reading -Spindle height mechanical readout -Spindle height digital readout -Motor HP 5,5 with manual star/delta switch -Motor HP 7,5 with manual star/delta switch -Automatic star/delta switch -Single-phase motor -Supplement for self-braking motor with brake release (standard version) -Overload protection and emergency button (standard version) -Reverse rotation (standard version) -Reverse rotation (CE version) -Spindle shaft with slot (standard version) -Profiling protection CE type (standard version) -Safety rounding cup TAPOA type (standard version) -Revolving support to exclude the spindle hood -Height readout -Interchangeable housing for spindle MK4 -Extra upper spindle for MK 4 -Aluminium fences for spindle hood -Lateral tables extension (total length 2100 mm) with frontal fence -Version with extended tables (length 2200 mm) with frontal fence SPINDLE MOULDER FOR TRIMMING This machine allows you to create a border in the wood making it ideal for numerous uses, such as in different types of shutters, and in frames and doors. In general, all wood milling machines are suited to trimming solid wood, whilst only certain models allow tenoning. There are various models of FAHDITALIA tools available, all of which are capable of trimming, whereas only the TC and TT models are also capable of tenoning. SPINDLE MOULDER FOR TENONING The spindle moulder for tenoning is a specific configuration of the basic tool; this is used in the tenoning process simply to create the joint between two jambs. For this procedure, however, a slightly different configuration of the tool is required and therefore not all of our models are suited to tenoning.. Each machine is designed and produced entirely in ITALY. All our Spindle moulder machines can have the chuck mounted at the top of the shaft to enable the mounting of pantograph milling tools, and can also be equipped with interchangeable shafts. They are also available with management software upon request so that procedures may be managed from a control panel.

Download Specification Sheet

Enquire Now